Siemens Xelibri 1 - Manual (Page 4)

3
Getting Started
Inserting SIM card
Your service provider provides you with a SIM card. If it
is delivered credit card size, snap out the smaller
segment and remove any rough edges.
1. Simultaneously squeeze opposite sides of the phone
firmly at points shown whilst lifting top end of cover
slightly.
2. Slide cover towards bottom of phone and remove.
3. If battery is fitted, remove by lifting tab at bottom.
4. Insert your SIM card, securing its bottom edge in the
slot. Ensure cut-off corner is positioned as shown.
To replace the battery and cover, reverse the previous
steps, ensuring bottom of cover is engaged before
swinging top into place.
Charging
When delivered, your battery will not be fully charged.
Allow 2-3 hours for a full charge.
Insert the charger in a suitable mains socket and plug
into the base of phone with the metal plate to the rear.
While it charges, you’ll see this symbol: h
If you don’t see the symbol, see What if ... on p 23.
1
1
2
3
4
celtris.book Seite 3 Mittwoch, 12. März 2003 9:04 09