Divx, Cd vcd dvd-rw dvd-v, Cd vcd – Marantz DV4610 User Manual
Page 18: Wma jpeg mp3, Dvd-v, Dvd-rw

– 18 –
EN
In stop mode, press the MODE
button.
• The PROGRAM screen will
appear.
Press the Cursor buttons (
▲ or
▼) to select a track, then press
the ENTER button.
• Press the CLEAR button to erase the most recently
entered track.
Press the PLAY button to start programmed play-
back.
3
2
1
CD
A-B REPEAT
Press the A-B REPEAT button
at your chosen starting point.
•
A- appears briefly on the TV
screen.
Press the A-B REPEAT button
again at your chosen end point.
•
A-B appears briefly on the
TV screen, and the repeat
sequence begins.
To exit the sequence, press the
A-B REPEAT button.
NOTES:
• The A-B Repeat section can only
be set within the current title (for
DVD), or current track (for Video
CD, Audio CD and disc with DivX
®
files).
• A-B Repeat is not available with
some scenes in DVD.
• To cancel the A point which was
set, press the CLEAR button.
• A-B Repeat playback does not function during title,
chapter, track or all repeat playback.
• For some DivX
®
files, A-B Repeat playback may not
function.
3
2
1
DivX
®
CD
VCD
DVD-RW
DVD-V
Programme Playback
A -
A - B
OFF
PROGRAM
ENTER
PLAY
CLEAR
TOTAL 0:03:30
CD-DA
1/ 2
1/ 1
NOTES:
• While the programme is being played back, the STOP
button works as follows.
• Press the STOP button once and then the PLAY button
again. Playback will restart from the point where the
STOP button was pressed. (Programme continued.)
• Press the STOP button twice and then the PLAY button
again. Playback will restart from the first track in the
usual way. Your programmes will be stored unless
either the disc tray is opened or power is turned off.
• Up to 99 tracks can be entered.
• To erase all tracks in the programme at once, select
ALL CLEAR at the bottom of the list at step
.
• If you wish to repeat the current track in the pro-
gramme, press the REPEAT button repeatedly until
TRACK appears during playback. If you wish to
repeat the entire programme, press the REPEAT button
repeatedly until
ALL appears during playback.
• Refer to page 22 for Programme Playback of MP3,
WMA, and JPEG.
• If eight or more tracks have been set in a programme,
the user can switch the right part of the screen with the
SKIP H
H
or G
G
button.
2
This function allows you to programme a playback order in a
desired sequence.
To activate the Repeat function, press the REPEAT button
during playback.
•
The Repeat mode changes as described below every time
you press the button.
CD
VCD
REPEAT TRACK / GROUP / ALL
NOTES:
• The Repeat Track setting will be cleared when moving
to other track.
• Repeat playback does not function during A-B Repeat
playback.
• Repeat playback is not available when playing the
Video CD with PBC function.
DivX
®
WMA
JPEG
MP3
TRACK
ALL
OFF
(current track repeat)
(entire disc repeat)
(repeat off)
TRACK
ALL
OFF
(current track
repeat)
(entire disc
repeat)
(repeat off)
GROUP
(current folder
repeat)
NOTE:
• The Repeat Track/Group setting will be cleared when
moving to other track or group.
To activate the Repeat function, press the REPEAT button
during playback.
•
The Repeat mode changes as described below every time
you press the button.
DVD-V
NOTES:
• The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
• Repeat playback does not function during A-B Repeat
playback.
• Repeat Title/Chapter is not available with some scenes.
• “ALL” is not displayed when playing the DVD-RW discs
recorded in Video mode.
Repeat
REPEAT TITLE / CHAPTER
• The REPEAT button is available only during playback.
CHAPTER
TITLE
OFF
(current chapter repeat) (current title repeat)
(repeat off)
PLAYING A DISC
CHAPTER
TITLE
OFF
(current chapter repeat) (current title repeat)
(repeat off)
ALL
(entire disc repeat)
DVD-RW
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 18