Minicom Advanced Systems 3000 - Manual (Page 21)

USER GUIDE
20
Sending/blocking Audio
Click to toggle between sending and blocking audio. When receiving audio
the device icons appear with a speaker like this: .
Sending/blocking a Serial command
Click to toggle between sending and blocking a Serial command. When
sending a Serial command the device icons appear with an arrow like this: .
Sending/blocking a bi-directional Serial command
When sending a Serial command, you can send a bi-directional Serial command to
a single Receiver / Receiver Long.
Click to send the bi-directional Serial command. The device icon appears
with a double arrow like this: . Click again to block the bi-directional Serial
command. You can then send the bi-directional Serial command to a different
Receiver / Receiver Long.
13. Tuning Receivers Long (or Line Splitters) via the Service
Utility
You can tune the Receivers Long / Line Splitters with the Service Utility from the
Transmitter/Broadcaster position or from the Receiver Long / Line Splitter itself.
The advantage of tuning from the Receiver Long, is that you can see the tuning on
the screen as you perform it. From the Line Splitter position you can be closer to
the screen than from the Transmitter/Broadcaster position.
To tune from the Transmitter/Broadcaster position:
Connect the Serial Download cable to the Control port of the
Transmitter/Broadcaster and the Serial port of a computer which has the Service
Utility installed.