Metz 28 C-2 - Manual (Page 38)

10. Care and maintenance
38
Remove dust and grime with a soft dry cloth, or a sili-
cone-treated cloth. Do not use detergents as these
may damage the plastic parts.
Forming the flash capacitor
The flash capacitor incorporated in the flashgun
undergoes a physical change when the flashgun is
not switched on for prolonged periods. For this
reason it is necessary to switch on the flashgun for
approx. 10 minutes every 3 months. The battery
must supply sufficient power to light up the flash-
ready light within one minute after the flashgun was
switched on.
Malfunctions and damage caused to the meca-
blitz due to the use of accessories from other
manufacturers
are not covered by our gua-
rantee!
• B 28 battery charger (Order No. 000100280)
To charge NiCad batteries, type IEC KR 15/51
• Mecalux 11 (Order No. 000000112)
Highly sensitive light slave for delay-free remote
firing of slave flashguns by a camera-triggered
flash. Responds also to infrared light. Does not
require batteries.
• Mecalux Holder 60-26 (Order No. 000060264)
To mount the Mecalux 11.
• Bounce diffuser 28-23 (Order No. 000028237)
• Bag T33 (Order No. 000006331)
ķ
11. Optional extras