Siemens ST60 - Manual (Page 19)

Calling
19
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
©
Siem
ens A
G
2001
, I
:\Mob
il\ST60
\r
et
ai
l\en
\_von_itl\S
T60_Retail_E
N_0
31209\S
T60_phone.f
m
Call menu
The following functions are only
available during a call:
§Menu§ Open menu.
Voice memo
Starts the voice recording.
Mute Switch microphone on/off.
If switched off, the person
on the other end of the
line cannot hear you (mut-
ing).
Loudspeaker
Activate/deactivate.
Volume Adjust volume during a
call.
Multiparty See Conference menu
above.
Contacts Opens contacts to select a
phone number.
Messages An SMS can be sent
(p. 39).
Control codes (DTMF)
Send control code
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists.
These entries are transmitted
directly as DTMF codes (control
codes).
J Enter DTMF control code.
B
Send.
Store in contacts
Store phone numbers and control
codes (DTMF codes) in the same
way as a normal entry.
J
Enter phone number.
0
Press until a “+” appears in
the display (wait for the
connection to be estab-
lished).
J Enter DTMF codes (num-
bers).
0
If necessary, wait again for
3 seconds at a time for the
receiver to process the
entries safely.
J
Enter a name.
§Save§ Press.