Memorex MMP3774 - Manual (Page 17)

DOWNLOADING AND TRANSFERRING FILES (CONT.)
16
TRANSFERRING MP3/WMA FILES AND WMA FILES WITH
DRM 9 OR DRM 10 USING THE WINDOWS MEDIA PLAYER
10 (FOR WINDOWS XP ONLY)
To transfer MP3 files/WMA files/WMA files with DRM 9 or 10 to
the player, follow the procedure described below using the
previously installed Windows Media Player 10. Before
beginning the procedure please turn the unit on and connect
the unit to the computer as previously described. Make sure
there is NO SD/MMC card inserted into the player.
1. Open the “Windows Media Player Browser 10” and click
on “Sync”.
2. Click on the “Sync List” pull-down menu to locate the
music files you wish to download. Then make sure to tick
the box next to the files.
3. Select the Portable Device (“MMP3774” or “MTP Player”)
that you want to copy to from the right side drop-down
menu. Click “Start Sync” to start transferring music files to
the player.
4. After finished transferring all the desired files to your unit,
follow the “Safely Remove Hardware” procedure on the
next page.
NOTES:
• For WMA files with DRM 10, you can only use Windows
Media Player 10 to transfer files to your player.
• For WMA files with DRM 10, the files will not be played if
you transfer the files into the SD/MMC card’s memory. You
must transfer the WMA files with DRM 10 to the player’s
internal memory for playback.
• For Windows ME and Windows 2000, please use
Windows Media Player 9 to transfer WMA files with DRM
9 to the player. For Windows 98SE, please visit
www.Microsoft.com to download the corresponding
Windows Media Player to transfer music files to the player.
• Make sure the SD/MMC card is not inserted into the unit.
Also, make sure you have selected “MTP Player” or
“MMP3774” in Step 3. Otherwise, the WMA files with
DRM10 will not be able to be played. Also, if the WMA files
with DRM 10 are transferred to the SD/MMC card, the files
will not be able to be played.