Marshall electronic V-R261-IMD-HDSDI - Manual (Page 26)

26
Specifications
■ PANEL
Screen Size 25.54” Diagonal
Display Area (h x v) 550.08 x 343.8 mm
Aspect Ratio 16:10 Native (4:3/16:9 Modes)
Pixels 1920 x RGB x 1200
Color Depth 24-bit (16,777,216 Colors)
Viewing Angle (h x v) 178° x 178°
Brightness 500 cd/m
2
Contrast Ratio 800:1
Dot Pitch (h x v) 0.0955 x 0.2865 mm
Pixel Pitch (h x v) 0.2865 x 0.2865 mm
■ VIDEO INPUT/OUTPUT
HD-SDI Input / Output
Supports ITU-R BT.656, SMPTE 259M, 292M, 274M
■ CONNECTORS
HD-SDI Video Input
1 x BNC Female (75 Ω )
HD-SDI Video Output (Active Loop-Through)
1 x BNC Female (75 Ω )
Power Input
4-pin XLR Male Connector
Tally Hardware Interface
HD-15 Female
RS-422/485 Interface
2 x RJ12 (Modular 6P6C)
■ TALLY HARDWARE INTERFACE (HD-15)
Activation requires contact closure of pin to ground on the
HD-15 connector:
Pin No. Signal
1 Green
2 Red
3 Yellow
4 Ground
5 N/C
6 N/C
7 N/C
8 N/C
9 N/C
10 N/C
11 N/C
12 N/C
13 N/C
14 N/C
15 N/C
■ RS-422/485 SERIAL INTERFACE (RJ12)
Protocols: Image Video, TSL v4.0, MEI
Pin No. Signal
1 Tx-
2 Ground
3 Rx+ (Receive from host)
4 Rx- (Receive from host)
5 N/C
6 Tx+
■ ELECTRICAL
Power Consumption 5.5A @ 24VDC (135 W)
Voltage Requirement 24 VDC
V-PS24-7.5 Power Supply:
Input 100V-240V, 2.5A, 50/60Hz
Output 18-24VDC, 7.5A, 150W Max
■ MECHANICAL
Dimensions (w x h x d): 23.30” x 16.29” x 2.14”
Weight (monitor only): 14.9 lbs
Operating Temperature 32°F to 120°F (0°C to 50 °C)
Storage Temperature -4°F to120°F (-20°C to 50°C)
Compliance Π, FCC-Class A, ANSI-63.4
(Certificates on file)
RoHs Do not dispose. Return to
Manufacturer or Authorized
Recycle Facility.