Philips Magnavox 20MT4405 - Manual (Page 16)

16
AUTO PROGRAM
NOTE : Ensure that the Antenna or Cable signal
connection has been completed before AUTO
PROGRAM is activated.
1
Press the MENU button on the remote
control to show the on-screen menu.
2
Press the CURSOR < or > to scroll
through the on-screen menu until until the
word INSTALL is highlighted.
3
Press the CURSOR > to display the
INSTALL menu features.
4
Press the CURSOR < or > to scroll
through the Install features until the word
Auto Program is highlighted.
5
Press CURSOR > to start the Auto
Program scanning of channels. Auto
Programing will store all available channels
in the TV’s memory then tune to the lowest
available channel when done.
.
6
When finished, press the STATUS /
EXIT button on the remote control to
remove the menu from the TV’s screen.
Y
ou can auto install programs on your TV
YY
. This makes it easy for you to select only the TV stations in your area
when the
YY
CH+ or CH– buttons are pressed. CH– CH–
58
59
MUTE SLEEP
STATUS
EXIT
A/CH CC
Channel Edit
Channel Edit
>
>
< >
STATUS / EXIT
MENU
When CABLE is selected, channels 1 - 125 are
available.
When ANTENNA is selected, channels 2 - 69 are
available.
When AUTO is selected, the TV will
automatically set itself to the correct mode based
on the type of signal it detects when the AUTO
PROGRAM feature is activated.
H
ELPFUL
H
INTS