Philips Magnavox 20MT4405 - Manual (Page 11)

11
COMPONENT VIDEO (CVI) INPUT CONNECTIONS
C
omponent Video inputs provide for the highest possible color and picture resolution on the playback of digital signal
source material, such as with DVD players. The colour difference signals (Pb, Pr) and the luminance(Y) signal are
connected and received separately, which allows for improved color bandwidth information (not possible when using
composite video or S-Video connections).
1
Connect the Component (Y, Pb, Pr)
Video OUT jacks from the DVD player (or
similar device) to the (Y, Pb, Pr) in(put) jack
on the TV. When using the Component Video
Inputs, it is best not to connect a signal to the
AV in Video Jack.
2
Connect the red and white AUDIO
CABLES to the Audio (left and right) output
jacks on the rear of the accessory device to the
Audio (L and R) AV Input Jacks on the TV.
3
Turn the TV and the DVD (or digital
accessory device) ON.
4
Press the AV button or the CH+ or CH-
buttons on the remote control to scroll the
channels until CVI appears in the upper left
corner of the TV screen.
5
Insert a DVD disc into the DVD player and
press the PLAY Æ button on the DVD Player.
The description for the component video
connectors may differ depending on the DVD
player or accessory digital source equipment
used (for example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr,
Cb). Although abbreviations and terms may vary,
the letters b and r stand for blue and red color
component signal. Refer to your DVD or digital
accessory owen’s manual for definitions and
connection details.
H
ELPFUL
H
INTS
L
VIDEO
S-VIDEO
CVI
Y
Pb
Pr
AUDIO
AV In
R
S-VIDEO
OUT OUT OUT
L
R
AUDIO VIDEO COMP VIDEO
Y Pb
Pr
3
5
4
1
2
Component
Video Cables
(Green, Blue,
Red)
Audio
Cables
(Red &
White)
Accessory Device
Equipped with
Component Video
Outputs
Back of TV
STATUS
EXIT
A/CH
SLEEP MUTE
SMART
SOUND PICTURE
SURF
CC