Morphy Richards Cocktail blender - Manual (Page 3)

Electrical requirements
Check that the voltage on the rating plate
of your appliance corresponds with your
house electricity supply which must be A.C.
(Alternating Current).
If the socket outlets in your home are not
suitable for the plug supplied with this
appliance, the plug should be removed and
the appropriate one fitted.
WARNING: The plug removed from
the mains lead, if severed, must be
destroyed as a plug with bared flexible
cord is hazardous if engaged into a live
socket outlet.
Should the fuse in the 13 amp plug
require changing, a 13 amp BS1362 fuse
must be fitted.
This appliance does not need to be
earthed. It is a double insulated product.
Do not connect the live or neutral
conductor wires to the earth connector.
Unpacking your cocktail
blender
Carefully unpack your cocktail blender,
as blades are very sharp.
Remove any stickers (except for serial
label) and wash all the parts that are safe to
immerse in water.
WARNING: Never immerse the
cocktail blender base unit in water or
any other liquid.
The base unit may be wiped with a clean,
damp cloth, only when unplugged from the
electrical socket.
This product is not suitable for cleaning
in a dishwasher.
3
Features
⁄ Filler cap/spirit measure
¤ Lid
‹ Stainless steel blender jug
› Blades and jug base
fi Cocktail blender base unit
fl Control switch
‡ Ice crush button
· Cocktail shaker jug
‚ Lid with strainer
„ Cocktail shaker cap
‰ Stirring spoon
‰
⁄
¤
‹
›
fi fl
‡
·
‚
„
48575 Rev 1 26/8/04 1:55 PM Page 3