MITSUBISHI ELECTRIC HS-HD2000U - Manual (Page 51)

49
TV Programs that End on the Day After
If you want to start the recording at 11:00 PM and end it at 2:00 AM the next day,
simply set the start time to 11:00 PM on the recording start day and the end time to
2:00 AM. There is no need to change the day of the week.
Program Skip Using Menus
Sometimes you may want to skip one day of a timer recording but do not want to
erase it. Program skip will prevent the recording, for that day only, of a program
you have scheduled to record every day or every week.
1 Press MENU on the remote control. Your VCR will turn on and VCR Main
Menu will appear. Turn the ADJUST dial to select Program to record. Turn the
SHUTTLE ring to the right.
2 Recap screen will display for 4 seconds. While this screen is displayed, turn
the ADJUST dial to place the cursor arrow next to the program you wish to
skip.
3 Press STOP. The cursor arrow will change to a X .
4 Press MENU twice to turn off the menus.
To resume recording every day or every week, change the X to the cursor arrow by
following steps 1 to 4 again.
Program Skip Using the POWER Button
If you have entered only one program into your VCR’s memory, you can skip the
program without going into the VCR’s menus. Simply press POWER on the front
panel once. The programmed recording light will turn off, and the program will be
skipped. If you decide not to skip the program, press POWER on the front panel
twice; the programmed recording light will light up again.
Changing Timer Recording Settings
1 Press MENU on the remote control. Your VCR will turn on and VCR Main
Menu will appear. Turn the ADJUST dial to select Program to record. Turn the
SHUTTLE ring to the right.
2 Recap screen will display for 4 seconds. While this screen is displayed, turn
the ADJUST dial to place the cursor arrow next to the program you wish to
change. Turn the SHUTTLE ring to the right. You will see the Program to
record setting menu.
3 Turn the SHUTTLE ring to the right repeatedly to select the item you wish to
change. Turn the ADJUST dial to change it. Then Turn the SHUTTLE ring to
the right repeatedly to return the altered program to the Recap screen.
4 Press MENU twice to turn off the menus. Then press POWER to turn off the
VCR. Make sure the programmed recording light is on.
Timer Recording
¬Program to record
CH DAY ON OFF
2 MO12 11:30a 1:30pSP
10 TH15 9:00p10:00pEP
X 2 M-F 8:00a 8:30aSP
--- -- --:-- --:-- SP
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Use STOP to skip on/off
¬Program to record
CH DAY ON OFF
§ 2 MO12 11:30a 1:30pSP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
Recap screen
¬Program to record
ƒChannel 2
ƒDay Monday 12
ƒStart time 11:30am
ƒStop time 1:30pm
ƒRecord speed EP
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
¬Program to record
CH DAY ON OFF
2 MO12 11:30a 1:30pSP
10 TH15 9:00p10:00pEP
§ 2 M-F 8:00a 8:30aSP
--- -- --:-- --:-- SP
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Use STOP to skip on/off
POWER
PROG REC
PROG REC