Inserting an ipod – Memorex Mi1006 User Manual
Page 8
7
INSERTING AN IPOD
®
Locate the correct iPod
®
holder to
use as shown on pages 12-13. Insert
the holder into the cavity (as shown),
making sure the tabs are facing front,
and slip the tabs into place.
1
Press the rear side of the holder until
it is positioned inside the cavity.
NOTE: To remove the holder, insert
your finger (or other object) into the
gap in the holder, then gently pull the
holder out to remove it.
2
If using the dock: Insert the iPod
®
onto
the holder. Gently push down so the
connector on the iPod
®
slides onto the
connector on the Mi1006. If the Mi1006 is
turned off, once you connect the iPod
®
, it
will start charging the battery until it is full. If
the Mi1006 is turned on and in
AM/FM/LINE IN mode, once the iPod
®
is
connected, the Mi1006 will change to
iPod
®
mode automatically. Then, if you
disconnect the iPod
®
, the Mi1006 will
revert back to the AM/FM/LINE IN mode.
When the iPod
®
is connected to the
Mi1006, it will be in the Pause mode.
3
If using the LINE IN jack: Insert an audio cable
(not included) into the LINE OUT jack on your
player and the other end into the LINE IN jack
on the side of the Mi1006. Press the Power
button to turn this unit on, then repeatedly press
the MODE button to select the LINE IN mode.
The external player’s output sound will be heard
through the Mi1006's speakers. If the Mi1006 is
already on, when you connect the external unit
to it, the Mi1006 will change to LINE IN mode
automatically. If you disconnect the external unit
from the LINE IN jack, the Mi1006 will revert
back to the AM/FM mode.
4
NOTES:
•
CHARGING: When the iPod
®
is inserted into the dock, the iPod’s
®
battery will charge until it is
full.
•
If the unit is already turned on and in AM/FM mode, if you insert the iPod
®
into the dock or
connect an external unit to the LINE IN jack, the unit will automatically switch to iPod or LINE IN
mode. If you disconnect the external unit or iPod
®
, this unit will revert back to the AM/FM mode.
•
CHANGING THE MODE: If units are connected to the dock AND the LINE IN jack, you can
press the MODE button repeatedly to select between iPod (dock)/LINE IN/AM/FM mode as
desired. (You will not be able to select between iPod/LINE IN mode, if there is no device or
iPod
®
connected to the LINE IN jack or the iPod
®
dock.) To turn off the unit, press the Power
button.
•
BACKLIGHT: When the unit is on, the LCD backlight will always be on.