Operation (continued) – Memorex Mi1006 User Manual
Page 11
10
OPERATION (CONTINUED)
Turn the Mi1006 on by pressing the
Power button; the display will light.
1
1
1
Press the MODE button repeatedly
to select the desired band (AM or
FM).
1
1
2
Repeatedly press the TUNE
Up/Down/Skip n / o buttons to
manually advance the frequency in
the display up or down until the
desired frequency appears.
For auto tuning, press and hold the
TUNE Up/Down/Skip n / o buttons
until the frequency in the display
starts to scan and then release; the
tuner will search and then stop on
the next strong station it finds.
Repeat this step until the desired
frequency appears in the display.
1
1
3
Adjust the volume as desired by
pressing the Volume Up/Down
buttons.
For private listening, plug in
headphones into the Headphones
jack on the rear of the Mi1006. The
speakers will be disconnected
when headphones are plugged in.
1
1
4
USING THE RADIO (Continued)