Mercury Tracer 1997 - Manual (Page 71)

4. Insert the tongue into the
proper buckle.
5. Push down on the child safety
seat while pulling on the loose part
of the lap belt webbing to tighten
the belt.
6. Before placing the child in the
child safety seat, forcibly tilt the
seat from side to side and forward
and back to make sure the seat is
securely held in place. If the child
seat moves excessively, repeat
steps five and six or properly
install the child seat in a different
seating position.
Using a tether strap
Contact the manufacturer of your
safety seat for information about
ordering a tether strap if one is not
provided with the seat. The tether
anchor hardware kit is part
number 613D20.
Your vehicle has tether anchor
attachment locations on the rear
package tray behind the back seat
(sedan) or along the rear edge of
the roof (wagon). Carefully follow
the instructions provided with the
kit.
Seating and safety restraints
71