Maintenance and care – Mercury Tracer 1997 User Manual
Page 169
The side marker lamp assemblies
are accessible through the interior
of the vehicle. The right assembly
(when facing the front of the
vehicle) is behind the same
interior panel as the liftgate
washer fluid; the left assembly is
located behind a similar-looking
interior panel directly opposite the
right panel. Both access panels are
directly below the rear side
windows.
To replace the backup lamp bulbs:
1. Open the liftgate and lean inside
the vehicle. Access the backup
bulb assemblies by carefully pulling
open the interior panel.
Maintenance and care
169