Rying, Warning – Maytag MD 55 User Manual

Page 11

RYING

ACK

(

SELECT MODELS

)

On Dryer Sides:
The drying rack hanger fits between the dryer top and the dryer

cabinet.
1) Place the flange on the hanger in the seam between the top

and the cabinet. Push all the way in.

2) Face the top of the drying rack toward the side of the dryer

cabinet.

3) Place the drying rack handle over the lip of the hanger.
On Dryer Back:
1) Place the drying rack hanger between the dryer top and the

dryer cabinet just below the back of the control panel.

2) Place the flange in the seam and push all the way in.
3) Face the top of the drying rack toward the back of the dryer

cabinet.

4) Place the drying rack handle on the lip of the hanger.

Heat

Air Fluff

Air Fluff or Heat

Washable sweaters (block to

shape and lay flat on rack)

Stuffed toys (cotton or

polyester fiber filled)

Stuffed toys (foam or

rubber filled)

Foam rubber pillows

Sneakers

UGGESTED

TEMS

UGGESTED

EMP

. S

ETTINGS

Rear Legs

Front

Handle

Flange

Lip

NOTE: If not included with your dryer, contact your Maytag dealer

for the accessory kit MAL1100AXX or call 1-877-232-6771 USA

and 1-800-688-8408 Canada.

NSTALLING THE

RYING

ACK

1) Open dryer door.
2) Position drying rack in tumbler placing the two rear legs in the

two recessed areas in the back wall of the dryer.

3) Place the front lip of the drying rack on top of the lint filter.
4) Place items to be dried on the rack, leaving space between

them so air can reach all the surfaces.

5) Close the dryer door.
6) Use the Time Dry cycle. Select time according to moisture

and weight of item. Start the dryer. It may be necessary to

reset the timer if a longer drying time is needed.

TORING THE

RYING

ACK

WARNING – Drying foam rubber, plastic or rubber on a heat

setting may cause damage to the item and could lead to a fire

hazard.

WARNING