Memorex MPH6928 - Manual (Page 11)

DESK/TABLETOP INSTALLATION
1) Plug the AC adapter cord into the
DC input jack on the back of
the base, then place the AC
adapter cord inside the molded
strain relief.
2) Plug one end of the long
telephone cord into the
TEL LINE
jack on the base, then place the
telephone cord into the right
molded channel cord holder.
3) Plug the other end of the long
telephone cord into the telephone
wall jack. (Remember, the phone
must be fully charged before you
can use it.)
10
!
Before you plug the other end
of the telephone cord into the
modular jack on the wall,
charge the battery (refer to
“Charging the Battery Pack,”
page 18).
TIP
When choosing a location for
your phone, keep the base unit
and the handset away from
electrical noise caused by
objects like motors and
fluorescent lighting.
C:...MPH6928 VA OM.vp
Mon Feb 14 15:27:25 2000
Color profile: Disabled
Composite Default screen