Metz 63 TF 51 - Manual (Page 50)

50
Mains voltage: 230 V ac, 50/60 Hz
- Australia: 240 V ac
Power consumption:
14. Technical data
14.2 Maintenance and care
14.1 Upgrade kits
• Multi-standard upgrade kit 031 NB 1038
For reception of „Standard M“ and „Standard L“ stations.
• NICAM upgrade kit 041 NB 1048
• SAT upgrade kit 082 NB 1014
SAT receiver to replace the terrestrial receiver.
Contact your dealer for further upgrade kits.
Guarantee
When you purchase the television, ensure that your dealer inclu-
des the completed TV „passport“. It must specify the date, the
dealer’s stamp and signature. Keep this document in a safe place,
together with the invoice. Any claims under the warranty will only
be accepted if these documents are submitted. Keep your TV
clean and handle it with care.
Cleaning the set
Always switch off the TV with the ON/OFF key before
you clean it!
Use a soft, dry or slightly moist cloth to clean the cabinet. Do not
use any strong detergents as they may damage the finish and
labels. Use a damp chamois leather to clean the screen.
Repairs
The TV should only be opened and repaired by quali-
fied service personnel!
CAUTION! DANGER!
Consult your dealer when repairs are necessary.
Any unauthorized attempts to open or repair the TV may result in
the guarantee becoming null and void.
Adequate shielding is provided against X-ray radiation (see
approval certificate on the rear panel of the TV).
Changing the high voltage or fitting a different type of picture tube
may cause an increased amount of X-ray radiation. Televisions
modified in such a manner are no longer in keeping with this
approval certificate and must not be used!
Power consumption
(to CENELEC/TC 59 X):
all TV-
sets
ca. 110 W
2 x 10 W
(2 x 6 W)
Music power output to DIN 45324
at 4 Ohms and 1 kHz
(sine output)
Consumption of
energy per hour:
110 Wh
Standby (all sets): ca. 1.5 W
Aerial input: 75 Ohms, asymmetric DIN 45325
Channel coverage: Standard channels 2...12, 21...69
Special channels S1...S20, S21...S41
S42...S46 (Belgian OIR channels)