Philips Magnavox CCZ196AT - Manual (Page 32)

32 Recording
• You cannot record one channel
while watching another.
• Recording options are on pages 33
- 43.
• You cannot record if DEFEAT
RECORDING is set to ON. (REC
DEFEATED will flash on-screen.)
Details are on page 43.
• If you pause a recording for more
than five minutes, the TV/VCR will
switch to Stop mode automatically
to protect the video cassette tape
from damage.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
Helpful Hints
Read and follow the steps below to record a TV program.
1
Press the COMBI button, then place a tape with its
record tab intact (see page five) in the TV/VCR. The power
will come on. Or, if the tape is already in the TV/VCR,
press the POWER button to turn on the TV/VCR.
2
Press the SPEED button until the desired tape speed
appears on the TV/VCR screen. Details about tape speed are
given below.
6
To stop recording, press the STOP/▼ button.
3
Use the CH(annel). Up/Down buttons or the Number
buttons to select the channel to be recorded. (Channels
cannot be changed during recording.)
4
Press the REC(ord)/OTR button once to start recording.
The REC(ord) light will glow.
● If there is not a tape in the TV/VCR, NO CASSETTE flashes on-
screen briefly.
● If the tape does not have a record tab, PROTECTED CAS-
SETTE CANNOT RECORD flashes on-screen briefly. The
TV/VCR will eject the tape. Insert another tape.
5
To pause the recording (for example, during commer-
cials), press the PAUSE/STILL button. The REC(ord) light
will flash. To resume recording, press the PAUSE/STILL
button again or the REC(ord)/OTR button. The REC(ord)
light will glow.
Tape Speed Maximum Record/Playback Time
Type T160 T120 T60
SP 2 hrs.
2 hrs. 1 hr.
(Standard Play) 40 mins.
LP 5 hrs.
4 hrs. 2 hrs.
(Long Play) 20 mins.
SLP
8 hrs. 6 hrs. 3 hrs.
(Super Long Play)
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (T160, T120, and T60). There are three playback
speeds: SP, LP, and SLP. During playback, the VCR selects the
tape speed automatically. When recording, you can change the
tape speed using the SPEED button (see page 24).
VAR.SLOW
CABLE/DBS COMBI
VOL.
CH.
A.CH +100
3
6
9
0
2
5
8
1
4
7
TRACKING F.ADV
SLEEP
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWD REW
MEMORY
SLOW
MUTE
VCR PLUS+
/ENTER
SMART
PICTURE
SKIP
SEARCH
SMART
SOUND INDEX
SEARCH
EJECT
MENU CLEAR
PAUSE/STILL
1
2
4
3
6
5
CCZ196comb.QX33 4/6/99 7:05 PM Page 32