Mark Levinson N 326S - Manual (Page 67)

A-1
Specifications
Unless otherwise specified, these specifications indicate nominal
values measured over a 20Hz to 20kHz bandwidth through balanced
(XLR) connections.
Power Consumption • 50W maximum
Operating Voltage • 100, 120, 220, or 230V AC power at 50 or 60Hz (preset)
Connector Complement • 3 balanced (female XLR) stereo inputs
• 4 single-ended (Mark Levinson-RCA) stereo inputs
• 1 balanced (male XLR) stereo main output
• 1 single-ended (Mark Levinson-RCA) stereo main output
• 2 single-ended (Mark Levinson-RCA) stereo record outputs
• 2 8-pin RJ-45 connectors for Link communication
• 1 6-pin modular RJ-11 connector for RS-232 communication
• 1 3.5mm mini-jack for trigger output
• 1 3.5mm mini-jack for ir input
• 1 phono ground terminal
• 1 IEC-standard ~ac mains connector
Gain • 0, 6, 12, or 18dB (line-level stage)
Volume Control Range • 80.0dB (maximum)
Gain Resolution • 1.0dB increments up to 23.0dB on front panel display (-57dB)
• 0.1dB increments above 23.0dB on front panel display (-57dB)
Specifications are subject to change without notice.
Appendix
A