Motorola L403C - Manual (Page 35)

Using your Answering Machine 35
7.4.5 Call screening on/off
You are able to hear a caller leaving a message. You
can then choose to ignore the caller or pick up the call.
Cordless handset screening
1. When the answering machine is recording, the
cordless handset displays SCREENING? .
2. Press
M
to listen to the caller through the
cordless handset earpiece, the cordless handset
displays
CALL SCREENING.
3. Press
J
to listen via the cordless handset
speakerphone.
4. Press
M
to stop screening and leave the
answering machine to record the message.
5. Press
<
to talk to the caller and stop recording.
Corded base screening
The caller is automatically heard through the corded
base speaker at the volume set, and the screen displays
Screening .
This can be turned off if you want, as follows:
1. Press
P
and
,
to select Answer Machine .
2. Press
P
and
,
to select Call Screening .
3. Press
P
and
,
to turn on/off call screening.
4. Press
P
to save.
7.4.6 Remote access on/off
Remote access allows you to operate your answering
machine and listen to your messages by calling your
phone from another phone.
1. Press
P
and
,
to select Answer Machine .
2. Press
P
and
,
to select Remote Access .
3. Press
P
and
,
to turn on/off remote access.
4. Press
P
to save.
The correct sequence of 3 security PIN digits needs to
be detected before entering remote access mode.
Random digits detected prior to the correct 3 digits
sequence are ignored, and answering machine
recording continues until the complete PIN is detected.
There is no system prompt to enter the remote access
code.
Press the following keys on your tone dial telephone to
carry out your desired function after entering remote
access mode.
Press... To...
1 Repeat message
2 Play/Stop message
3 Skip forward to the next message