MicroNet Technology EtherFast 100Mbps Fiber-Optic Adapter SP2515 SERIES - Manual (Page 7)

test reminds you that the connection link
might be fail, either the cable is not connected or the cable link
fails.
For the test, it is necessary to
connect your computer with its supporting hub or another
computer. This is a "Ping-Pong" test. This test cannot be
completed except two computers on the LAN for sending or
receiving the test packets between computers.
For the test
2.7 Specifications 2.7 Specifications 2.7 Specifications 2.7 Specifications
Standards IEEE 802.3u 100BASE-FX
PCI Specifications Revision 2.1
Speed 200Mbps full-duplex
100Mbps half-duplex
Performance 148,800pps for 100Mbps
Fiber Cable 62/125µm multi-mode fiber-optic
cable, up to 2 km
Wavelength 1300nm
LED Indicators LNK (Link) /ACT (Activity)
Dimensions 136 mm × 89 mm
Net Weight 90g approx.
Power Consumption 5VDC, 500mA max.
Operating Temperature 0°C to 40° C (32°F to 104°F)
Storage Temperature -25°C to 70°C (-13°F to 158°F)
Humidity 10%-90% non-condensing
Network
Ethernet Address
00E07DC00002
Target Machine
Ethernet Address
00E07DC00001
Master Machine