Maytag GBMDC 709T - Manual (Page 4)

5019 607 00937
GB
MDC 709T Quick Reference Guide
Before using the machine, please also read the instructions for use carefully!
(Subject to technical modifications)
4
Programme selector knob
The drying programme is selected by turning this knob.
“Start (Pause)” button
The drying programme is started by pressing this button. The
indicator lamp flashes during the selection phase and lights up
during drying.
Indicator lamps
Filter
The indicator lamp lights up when the filter and/or heat
exchanger need cleaning.
Clean the filter at the end of every cycle.
Water container
The indicator lamp lights up when the water container needs
to be emptied. The drying cycle is automatically interrupted.
Empty the container and restart the drying programme.
Empty the water container after every drying cycle.
Clean heat exchanger
The Led lights up after 30 cycles when the heat exchanger
needs to be cleaned. Clean the heat exchanger. Then for
reset the led indication, turn the programme selector knob
to the vertical position indicated by the symbol “
” and
press the “Start (Pause)” button during 3 seconds until led
switches off.
Time remaining display
Depending on the programme selected, once the drying
cycle has been started, a default drying time is displayed. The
time displayed is corrected by a few minutes depending on
the volume, type and dampness of the laundry.
The drying time specified is a calculated value which
will be updated during the drying programme.
The flashing lines indicate that the calculation is running. The
remaining time will be updated.
Overdry protection
The indicator lamp lights up when a humidity controlled
program is selected, to indicate the working protection
function. Function is not active in time controlled
programmes 10’, 20’, 30’, 40’, 60’, 90’ and “Airing”
“
”.
Dryness adjustment
This is an option to adjust the dryness of the laundry
according to your wishes. Select the desired programme and
the option dryness level adjustment by pressing the button
“+” for more dry or the button “-” for more humid. The
selected dryness will be stored as a pre-setting to the
selected drying programme. Using the drying programme
next time the pre-setting appears. By pressing the dryness
adjustment buttons “+” or “-” the pre-setting can be
changed.
Programme sequence
Overdry
protection
Drying
Anti-
crease
End
of cycle
Options
Gentle
Reduces drying intensity (recommended
for delicate items).
Rapid
Shortens drying duration (recommended for thin items of
the same size).
Buzzer
Signals/sounds end of drying cycle.
Anticrease
Prevents laundry from creasing up to 12 hours. The
automatic buzzer signal can be switch-off by selecting anti-
crease.
Delayed Start (Pause)
Delays the start of the drying cycle by 1 to 12 hours.
Each time the button is pressed, the start time is delayed by
1 hour.
Then press the “Start (Pause)” button to confirm the final
selection and to start the dryer.
The delayed start indicator lamp flashes and the countdown
counts down in 1-hour intervals. The countdown is indicated
by the indicator lamp above the button flashing. During the
countdown, the drum will turn from time to time to re-
distribute the laundry. To cancel or change the previously set
time delay, set the index of the programme selector knob to
the top, or open the door.
+