MITSUBISHI ELECTRIC DD-6040 - Manual (Page 18)

– 18 – EN
1L25
STARTING FROM A DESIRED
TIME COUNT
1 Press the SEARCH MODE button twice
during playback
2 Press the numeric buttons to set the desired
time count.
¡ Example: 1 hour, 23 minutes and
30 seconds
1 2 3 3 0
Notes
¡ In the case of DVD, Time Search in Title is effective,
but Time Search in Chapter is ineffective.
¡ In the case of CD and Video CD, Time Search in
Track is effective, but Time Search in the entire disc
is ineffective.
¡ Playback from a desired time count is not available
with some discs or if the unit is in stop mode.
¡ If wrong numbers are entered, press the CLEAR
button and re-enter the correct numbers.
VCD ( ) CD DVD-V
: : 1 : 23 : 45 TOTAL
RANDOM (Audio CD)
1 Press the MODE button in stop mode.
¡ The program setting menu screen will appear.
2 Press the MODE button again.
CD
PLAY
RANDOM PROGRAM
- - no indication - -
CD [AUDIO] TOTAL 0:45:55
RANDOM
3 Press the PLAY button. Random playback
will then start.
Note
¡ Program playback is not available during random
playback.
MARKER SETUP SCREEN
Use markers to memorize your favorite places on a
disc.
1 Press SEARCH MODE four times (CD: three
times) during playback.
¡ The display screen and Markers will appear on the
TV screen.
2 Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9
or 10 and ensure that “- : - - : - -” appears in
the display.
3 When reachs the desired point, press
ENTER.
¡ The Title or Track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, press SEARCH
MODE four times (CD: three times) during
playback, and s or B to choose the desired
marker, then press ENTER.
VCD ( ) CD DVD-V
Notes
¡ Opening the disc tray, turning off the power, or
selecting AC at step 2 and pressing ENTER will
erase all Markers.
¡ To clear a marker, using s or B, position the cursor
on to the marker number to be cleared and press
CLEAR.
¡ You can mark up to 10 points.
5 Press SEARCH MODE or RETURN to exit.
without PBC
function
without PBC
function