Operation, Installing or removing socket, Standard bolt – Makita 6905H User Manual

Page 6

Text mode
Original mode

Installing or removing socket

To install the socket, push it onto the anvil of the tool until it
locks into place.
To remove the socket, simply pull it off.

OPERATION

The proper fastening torque may differ depending upon the
kind or size of the bolt, the material of the workpiece to be
fastened, etc. The relation between fastening torque and fas-
tening time is shown in the figures.

1. Socket

2. Anvil

002337

N.m

(ft.lbs)

200
(144)

150
(108)

100
(72)

50
(36)

0.5

1.5

(S)

M20X50
(3/4” X 2”)

M20 (3/4”)

M16X50
(5/8” X 2”)

M12X50
(7/16” X 2”)

M16 (5/8”)

M12 (7/16”)

Fastening time

astening torque

Proper f

astening torque

Standard bolt