Mobi Technologies 70060 - Manual (Page 11)

Automatic Infra-Red Night Vision
The infra-red night vision feature of the camera allows it to pick up imagery during
darkness or periods of very low levels of light. This function will switch on
automatically when the level of light is low.
During this time a black and white image will be displayed on the monitor and only
objects within 6 ft/2 m will be seen on the monitor.
MONITOR OPERTATION
Power ON/OFF
Use the volume and ON/OFF switch on the side of the unit to turn on the unit.
Channel Selection
Press the Channel Switching Button at the front of the monitor to select a channel
with optimized clear image and sound. Channels are indicated by LED lights labeled
with letters A or B.
Automatic Channel Scan
Selecting this option allows the Monitor to scan between both channels automatically,
stopping at each for about 5 seconds. Press the Channel Switching Button until the
LED light labeled AUTO is turned on and starts blinking. Then, images from
different Camera units (on different channels) can be seen on the Monitor as the
channels alternate.
LCD On/Off
This power saving feature is located on the side of the monitor. When the monitor is
switched to LCD “off” position and the camera remains on, there will be no picture
on the monitor screen but transmission continues. This way the Monitor uses less
power but is still operational as an audio-only monitor. The Monitor will resume
working with a clear picture when the LCD is switched back to “on”.
10