Mega System Tech iCV-02 User Manual
Page 55
iCAMView user manual -52-
Chapter 6: iMultiView
:
Manually adds the iCAMView to be monitored.
“Access by iCAMView Address”
Enter either the WEB, without the www (Example:
megateccn.myddns.com) or LAN IP of iCAMView (example:
192.168.0.30)
“Remote Port”
This is iCAMView UDP port.
“Access by Image Server”. Enter the information as set in Section
2.4.6.
:
Highlight the iCAMView to be deleted from iMultiView’s list. Click
“Yes” to confirm deletion of selected iCAMView.