MITSUBISHI ELECTRIC PD-5050 - Manual (Page 11)

2
����������
�����������������������
���������� ������ ������� ���������� ������
� � � � � � �
�������������
���������� ������ ������� ���������� ������ �������������
� POWER
Push this button to turn the display’s main power on or
off.
� REMOTE SENSOR WINDOW
Receives the signals from the remote control.
� POWER/STANDBY Indicator
When the power is on ............................. Lights green.
When the power is in the standby mode ... Lights red.
� INPUT / EXIT BUTTON
Switches the input.
The available inputs depend on the setting of “BNC
INPUT”, “RGB SELECT” and “HDMI SET UP”.
Functions as the EXIT buttons in the On-Screen Menu
mode.
� LEFT/– and RIGHT/+
Functions as the ADJUST (
� �
/
�
) buttons in the On-
Screen Menu mode.
� VOLUME and
Adjusts the volume. Functions as the ADJUST (�/�)
buttons in the On-Screen Menu mode.
� MENU/ENTER BUTTON
Display the main menu or select a menu item.
�������
The Power on/off button does not disconnect the plasma
display completely from the main power supply.
2