Miller Electric Legend AEAD-200-LE - Manual (Page 42)

TM-428 Page 38 Miller Legend
8-4. Changing Engine Oil, Oil Filter, And Fuel Filter
ST-140 091-E / ST-144 840-C Ref. ST-168 046 / ST-800 395 / S-0842
Stop engine and allow to cool.
1 Oil Drain Valve
2 1/2 ID x 12 in Hose
3 Oil Filter
Change engine oil and filter ac-
cording to engine owner’s manual.
Y Close valve and valve cap
before adding oil and run-
ning engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 8-2).
4 Fuel Filter
5 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any
spilled fuel.
Start engine, and check for fuel
leaks.
Stop engine, tighten connections
as necessary, and wipe up fuel.
Tools Needed:
1
2
3
4
5
Full