Error display – MITSUBISHI ELECTRIC P91DW(UB) User Manual

Page 19

When an error in operation occurs, an audible alarm and a
visible error is displayed in the LED indicator.

Cause/Error display

1 No paper

2 Overheat

ERROR DISPLAY

[Symptom]
• When the paper runs out or the paper is not installed, printing

becomes impossible and alarm tone is given.
In this case, all the functions of buttons and switches become
invalid.

Symptom/Remedy

[Remedy]
Install brand-new paper according to "5. INSTALLATION OF
PAPER" on page 8.

[Symptom]
• When the head gets overheated, "

" is displayed on the

indicator and alarm tone is given.
In this case, all the functions of buttons and switches
become invalid.

[Remedy]
Wait until the head is cooled down.

3 Button input

error

[Symptom]
• An alarm tone is given once, "

" is displayed for one second

in the indicator, and button operation is nullified in the following
cases:

• The COPY button is pressed first after the power is turned

on.

• The DOWN, UP, SET or GAMMA button is pressed when

the MODE switch No. 1 is set to ON.

• Any button on the front panel is pressed when one of the

other error messages is displayed on the LED.