Philips Magnavox 26MF330B - Manual (Page 14)

14
EN
PC Connection
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it
requires stereo mini plug conversion cables as well.
If you connect this unit to your PC, you can use this unit as a
PC monitor.
e.g.)
DVI ANALOG AUDIO
DVI OUT
32MF330B
stereo mini plug
conversion cables
stereo mini plug
conversion cables
HDMI-DVI conversion
cable
rear of this unit r
1 To HDM 1 To HDMI1
y ck onl Input jac o t jack l Input jack only
To HDMI1 To HDMI1
Input jack onlyy Input jack only
HDMI-DVI conversion cable
should be with ferrite core.
r er er personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer personal computer
HDMI-DVI conversion cable
rear of this unit
26MF330B
The following video signals can be displayed:
Format Resolution Refresh rate
VGA 640 x 480
60Hz
SVGA 800 x 600
XGA 1, 024 x 768
WXGA
1, 280 x 768
1, 360 x 768
Other formats or non-standard signals will not be displayed
correctly.
Note
• Please purchase the cable HDMI-DVI conversion cable that has a ferrite
core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
Cable Management
Keep the cables through this holder to avoid tangling them.
rear of this unit
26MF330B
rear of this unit
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an
AC outlet after all the necessary connections are completed.
completed.
AC outlet
rear of this unit 32MF330B
AC power cord
AC outlet
rear of this unit
26MF330B
Caution:
• Do not connect the AC power cord to a power supply outside the
indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this range may
result in fi re or electrical shocks.
Note
• Each time you plug in the AC power cord, no operations will be performed
for a few seconds. This is not a malfunction.