Metra Electronics 95-7510HG - Manual (Page 10)

95-7510 KIT ASSEMBLY
8
DISPLAY CUSTOMIZATION
Press and hold the A/C Mode button to scroll through the various kit options (AMB
TEMP ON or OFF, AMB TEMP C or F, SET TIME 12/24H, and SET TEXT). 1
When you see the option you want just let the button go and the action on the
screen will be performed. (ie: To turn the ambient temperature on you would scroll
through until the display says “AMB TEMP ON” and let the button go.) 2
To set the time hold down the A/C Mode button until the display says “SET TIME
12/24H” then let the button go. 3
To switch between 12H and 24H press the front defrost button to the left of the
A/C Mode button. 4
To change the Hour press the rear defrost button to the right of the A/C Mode
button. 5
To change the minute press the A/C button at the top of the A/C Mode button. 6
At any time if you do not press any buttons for 5 seconds the display will save and
return to the default screen and the climate control buttons will return to their
normal configuration. 7
If you hold the A/C Mode button down long enough the display will say “SET
TEXT”. This will allow you customize the default text on the display. 8
Once the display says “SET TEXT” let go and the first letter of the display will begin
blinking. 9
Press the front defrost button to move the cursor left and the rear defrost button
to move the cursor to the right. 10
You can scroll up with the A/C button and down with the Recirc/Fresh button
through the various alpha, numeric, and symbol characters. 11
When you are finished entering your text if you do not press any buttons for 5 sec-
onds the display will save and return to the default screen and the climate control
buttons will return to their normal configuration. 12
* Note: Refer also to the instructions included with the aftermarket radio.
FM1 877 AC
0
2
3
4
OPEN TILT
A/C
MODE
1
FM1 877 AC
0
2
3
4
OPEN TILT
A/C
MODE
1