Motorola MOTOROKR S9-HD - Manual (Page 5)

17
headphones status
audio tones
The audio tones in your ear speakers provide current
operating status of headphones, including Bluetooth
wireless connection(s) status to your phone and/or music
player.
long red flash idle (not connected to a
device)
quick red flash battery low
three red flashes powering off (or disabling
indicator light)
Audio Tone Headphones Status
double tone when
adjusting volume maximum or minimum
volume reached
tones while adjusting
volume increasing or decreasing
volume
Indicator Light Headphones Status
18
headphones status
high tone followed by
low tone (repeated
every 60 seconds) low battery
no audio indications;
deteriorating audio
quality out of range
ring tone incoming call
two ascending low
tones pairing confirmation
two ascending
medium tones mute enabled
two descending
medium tones power off/mute disabled
series of ascending
tones power on
three ascending high
tones call connected
Audio Tone Headphones Status
19
headphones status
three descending
high tones call ended/disconnected
low to high tone skip track forward
high to low tone skip track backward
single medium tone play music
single high tone stop music
Audio Tone Headphones Status
20
tips & tricks
tips & tricks multi-point (two device) connection
To connect to phone and music device at the same time:
1
Pair and connect to your phone first (see page 6).
2
Turn off your phone and your headphones.
3
Turn your headphones back on.
The Bluetooth indicator becomes steady blue to
indicate the headphones are in discoverable mode.
4
Turn on your music device. Make sure the Bluetooth
feature is turned on in the device.
The music device searches for your headphones.
5
Complete steps 5 through 7 on page 6 to pair and
connect your music device and headphones
successfully.
6
Turn off your headphones.
7
Turn your phone back on and make sure the
Bluetooth feature is turned on in both the phone and
music device.
8
Turn your headphones back on. It should now
connect to both devices.