Meyer Sound MSL-6 - Manual (Page 2)

2
Made by Meyer Sound, Berkeley, CA, USA
European Office:
Meyer Sound Germany
GmbH
Carl Zeiss Strasse 13
56751 Polch, Germany
U ULL
C C
U ULL
® ®
LISTED
3K59
COMMERCIAL
AUDIO SYSTEM
According to ISO/IEC Guide and EN 45014
Declaration of Conformity
The product herewith complies with the require-
ments of the Low Voltage Directive 73/23/EEC and
the EMC Directive 89/336/EEC.
declares that the product: The Manufacturer:
Product Name: MSL-6
Product Options: All
Name: Meyer Sound Laboratories
Address: 2832 San Pablo Avenue
Berkeley, California 94702-2204, USA
conforms to the following Product Specifications:
Safety: EN 60065: 1994
EMC: EN 55022: 1987 - Class A
IEC 801-2: 1984 - 8 kV
IEC 801-3: 1984 - 3 V/m
IEC 801-4: 1984 - 0.5 kV Signal Lines,
Office of Quality Manager
Berkeley, California USA
October 1, 1995
1.0 kV Power Lines
Shock: 30 g 11 msec half-sine
on each of 6 sides
Vibration: 10 – 55 Hz (0.010 m
peak-to-peak excursion)
Operating temperature: 0 ° C to +45 ° C
Nonoperating temp: < –40
°
C or > +75
°
C
Humidity: to 95% at 35 ° C
Operating altitude: to 4600 m (15,000 ft)
Nonoperating altitude: to 6300 m (25,000 ft)
Environmental Specifications for
Meyer Sound Electronics Products
!
Pour indiquer les risques
résultant de tensions
dangereuses
Zu die gefahren von
gefährliche spanning
zeigen
Important operating
instructions
Pour indequer important
instructions
Zu wichtige betriebs-
anweisung und unter-
haltsanweisung zeigen
Frame or chassis
Masse, châssis
Rahmen oder chassis
Protective earth ground
Terre de protection
Die schutzerde
Para indicar azares
provengo de peligroso
voltajes
Para indicar importante
funcionar y mantenimiento
instrucciones
Armadura o chassis Tierra proteccionista
These symbols indicate important safety or operating features in this booklet and on the chassis.
Dangerous voltages:
risk of electric shock
Symbols Used
Contents
Introduction .......................................................... 3
AC Power .............................................................. 3
Audio Input ........................................................... 5
Amplification and Protection Circuitry ............... 6
Rigging .................................................................. 7
Measurement and System Integration ............... 8
Complete Systems ............................................ 8
Driver Troubleshooting ................................... 10
Dimensions ...................................................... 12
Physical Construction ..................................... 12
Safety Summary .............................................. 13
Controls and Connectors ................................ 14