Information, Maintenance, Specifications – Philips Magnavox DVD/CD Player with Video Cassette Recorder DV220MW9 User Manual

Page 27

PRECAUTIONS

PREPARATION

ADVANCED PLAYBACK

BASIC OPERATIONS

RECORDING

OPTIONAL SETTINGS

INFORMATION

TROUBLESHOOTING

INFORMATION

Specifications

Servicing

• Please refer to relevant topics on the “Troubleshooting

Guide” on page 26 before returning the product.

• If this unit becomes inoperative, do not try to correct the

problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call
our toll free customer support line found on the cover of
this manual to locate an authorized service center.

Cleaning the Cabinet

• Wipe the front panel and other exterior surfaces of the

unit with a soft cloth.

• Never use a solvent, thinner, benzene or alcohol to clean

the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the
unit.

Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center to out. Do not wipe
in a circular motion.

• Do not use solvents such as benzine, thinner, commercially

available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.

Cleaning the Disc Lens

• If this unit continues to perform improperly even after

you have referred to the relevant sections and to the
“Troubleshooting Guide” in this manual, the laser optical
pickup unit may be dirty. Consult your dealer or an
authorized service center for inspection and cleaning of
the laser optical pickup unit.

Disc Handling

• When you handle a disc, hold it by its edge and try not

to touch the surface of the disc.

• Always store the disc in its protective case when not in use.
• Do not glue paper or put stickers onto the disc. This may

damage the disc, and the unit may not read it correctly.

Auto Head Cleaning

• Automatically cleans video heads as you insert or

remove a cassette tape, so you can see a clear picture.

• If the playback picture is blurred or interrupted while

the TV broadcast is showing clear, the dirt may have
accumulated on the video heads, or the usage of rental
or worn cassette tapes can cause this problem. If a
streaky or snowy picture appears during playback, the
video heads in your unit may need to be cleaned.
1. Please visit your local audio/video store and purchase

a good quality VHS video head cleaner.

2. If a Video head cleaner does not solve the problem,

please call our toll free customer support line found
on the cover of this manual to locate an authorized
service center.

Note:

• Remember to read the instructions along with

the video head cleaner before use.

• Clean video heads only when problems occur.

ignal Check

IR Sig

IR Signal Check

• If the remote control does not work properly, you can

test if the remote control is sending out the infrared
signal with a digital camera (including built-in camera
of cellular phone). It will help to define the cause of
malfunction.

With a digital camera
(including built-in camera of cellular phone):
Direct a digital camera to remote control,
press and hold a button on remote control.
If infrared light appears through digital
camera, the remote control is working.

Output signal format :

NTSC color

Video heads :

Rotary four-head

Tape width :

1/2 inch (12.65 mm)

Tape speeds :

SP : 1-5/16 inch/sec. (33.40 mm/sec)
LP : 16.67 mm/sec.
SLP : 7/16 inch/sec. (11.12 mm/sec.)

Disc media size :

5 inches (12 cm) / 3 inches (8 cm)

Terminals :

Component video output :

RCA jack x 3
Y :

1 Vp-p (75 Ω)

Pb : 700 mVp-p (75 Ω)
Pr : 700 mVp-p (75 Ω)

S-video output :

Mini DIN 4-pin jack x 1
Y :

1 Vp-p (75 Ω)

C :

286 mVp-p (75 Ω)

Video output :

RCA jack x 1 1 Vp-p (75 Ω)

Coaxial digital audio output : RCA jack x 1 500 mVp-p (75 Ω)
Audio output :

RCA jack x 4 2 V rms

Video input :

RCA jack x 2 1 Vp-p (75 Ω)

Audio input :

RCA jack x 2 2 V rms

Recommended circumstances of recording MP3 fi les :
Sampling

frequency :

44.1 kHz or 48 kHz

Constant

bit rate :

kbps ~ 320 kbps

Remote control :

Digital encoded infrared light system

Operating temperature : 41 °F (5 °C) to 104 °F (40 °C)
Power requirements :

120 V AC +/- 10 %, 60 Hz +/- 0.5 %

Power consumption (maximum) :

16 W

(standby : 2.8 W)

Dimensions :

W :

17 3/16” (435 mm)

H :

3 3/4”

(94 mm)

D :

9 3/16” (233 mm)

Weight :

Approx. 5.63 lbs (2.55 kg)

• Designs and specifications are subject to change without notice.
• If there is a discrepancy between languages, the default language will

be English.

Maintenance

INFORMATION