Using the battery pack – Philips Magnavox MPD-700 User Manual
Page 10
Attach the battery pack properly following the
explanation below. Make sure that the bat-
tery pack is attached firmly to the player
when using it. Otherwise, the battery may
become detached and cause injury or
damage. Charge your battery before using.
Attaching the Battery Pack
Disconnect the AC adaptor and the power cord
from the player, before you attach the battery
pack.
1 Turn the player off.
2 Turn the player upside down.
3 Insert the battery pack's catches into the
player's corresponding holes. Then, slide
the battery pack until it is attached firmly.
TIP :
Remove the battery pack from the player
when not in use.
Detaching the Battery Pack
1 Turn the player off.
2 Disconnect the AC adaptor and the power
cord from the player.
3 Turn the player upside down.
4 Slide the battery pack's lock switch, then
slide off the battery pack as shown.
Charging the Battery Pack
We recommend you charge in room tempera-
ture (68°F) conditions. Never dispose of in fire
or water.
1 Turn the player off.
2 Attach the battery pack to the player.
3 Connect the supplied AC adaptor and the
power cord to the player. When charging
starts, the CHG indicator illuminates red.
When charging is completed, the CHG
indicator turns off.
TIP :
When charging is in progress, do not discon-
nect the AC adaptor and the power cord until
the CHG indicator turns off.
–
When the player is turned off, the charging
time is approximately 3-4 hours (depending
on environmental conditions).
–
While a disc is playing, the charging time is
approximately 6-8 hours.
–
The attached battery pack may become
warm when you are charging it or operat-
ing the player. This is normal.
–
A battery icon
is shown on the screen
when battery power pack is running low.
10
Using the Battery Pack
PHONES
VOLUM E
VIDE
O
OUT
IN
AUDIO
OPTICAL
OUT
S-VIDEO
DC IN 9V
LINE SELECT
D
V
P
7
0
0
P
O
R
TA
B
L
E
D
V
D
P
L
A
Y
E
R
POWER
ON
OFF
POWER
ON
OFF
POWER
ON
OFF
MPD700/17_linda 9/9/03 8:43 AM Page 10