Morphy Richards EB75310 - Manual (Page 4)

3
Product safety
• Ensure the blanket is used in
the manner in which it is
intended, either as an
overblanket or underblanket as
appropriate.
• If used on an adjustable bed,
check the blanket or cord
cannot become trapped or
rucked.
• Ensure the product is correctly
fitted to the bed, following the
instructions in this booklet.
• Do not insert pins or any sharp
objects into the blanket.
• Do not tuck the heated part of
material under the mattress.
• Do not use if the blanket is wet.
• Avoid pressing creases or folds
into the blanket. Do not switch
on if the blanket is folded,
creased or rucked.
• Do not use any lead, switch or
cord other than the one
supplied with this blanket.
• Do not coil or lay the lead on
the blanket.
• Not intended for medical use in
hospitals.
• WARNING: When storing the
appliance, allow it to cool
down before folding.
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating label of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your
home are not suitable for the
plug supplied with this
appliance, the plug should be
removed and the appropriate
one fitted.
Warning: The plug removed
from the mains lead, if
severed, must be
destroyed, as a plug with
bared flexible cord is
hazardous if engaged into
a live socket outlet.
Should the fuse in the 13 amp
plug require changing, a 3 amp
BS1362 fuse must be fitted.
This appliance does not need to
be earthed. It is a double
insulated product.
75310 rev2 11/1/08 15:33 Page 4