Makita UC170D User Manual

Page 6

Replacement Saw Chain - A chain that complies with the kickback performance require-
ments of ANSI B175.1 when tested with specific saws. It may not meet the ANSI perfor-
mance requirements when used with other saws.

Saw Chain - A loop of chain having cutting teeth, that cut the PVC tubing and that is driven
by the motor and is supported by the guide bar.

Bumper - Front face of the saw head which maintains position while sawing.

Switch - A device that when operated will complete or interrupt and electrical power circuit
to the motor of the saws.

Lock-off Button - A movable stop that prevents the unintentional operation of the switch
until manually actuated.

IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER & BATTERY CARTRIDGE

USC001-3

1. SAVE THESE INSTRUCTIONS - This man-

ual contains important safety and operat-
ing instructions for battery charger.

2. Before using battery charger, read all

instructions and cautionary markings on
(1) battery charger, (2) battery, and (3)
product using battery.

3. CAUTION - To reduce risk of injury, charge

only MAKITA rechargeable batteries
marked on the charger label. Other types
of batteries may burst causing personal
injury and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended

or sold by the battery charger manufac-
turer may result in a risk of fire, electric
shock, or injury to persons.

6. To reduce risk of damage to electric plug

and cord, pull by plug rather than cord
when disconnecting charger.

7. Make sure cord is located so that it will

not be stepped on, tripped over, or other-
wise subjected to damage or stress.

8. An extension cord should not be used

unless absolutely necessary. Use of
improper extension cord could result in a
risk of fire and electric shock. If extension
cord must be used, make sure:

a. That pins on plug of extension cord

are the same number, size, and shape
as those of plug on charger;

b. That extension cord is properly wired

and in good electrical condition;

c. That wire size is at least as large as

the one specified in the table below.

Table 1: RECOMMENDED MINIMUM AWG SIZE FOR EXTENSION CORDS FOR BATTERY CHARGERS

Length of Cord (Feet)

100

150

AWG Size of Cord