Metz Canon Eos SCA 3102 M5 - Manual (Page 37)

16. Troubleshooting hints
Should, for example, the LC display indicate
meaningless information or should the flashgun
not function properly you can try to overcome this
problem as follows:
1a) Switch off the flash unit by its main switch.
1b) Remove the batteries.
1c) Switch on the flash unit for about 1 second and
then switch it off again.
1d) Re-insert the batteries.
2a) Switch off the camera and the mecablitz
2b) Remove the SCA adapter from the mecablitz
and then re-mount it.
The mecablitz should operate properly when it is
switched on again. Contact your local dealer
should this not be the case.
For more information, visit our web site at
www.metz.de
37