Metz Canon Eos SCA 3102 M5 - Manual (Page 13)

ting instructions). In that case choose automa-
tic flash mode A or manual flash mode M!
Adjustment procedure
• Switch on flash and camera.
• Lightly touch the shutter release to trigger the
exchange of data between the flash and the
camera.
mecablitz 45 CL-4 digital
• Set the f-stop on the flash for selecting aperture
priority to TTL.
• Press the "mode" button until "ETTL" appears in
the display.
With some cameras, ETTL is also activated
automatically if the f-stop for selecting apertu-
re priority is set to TTL.
mecablitz 54 MZ-...:
• Press the "mode" button until "TTL" flashes in
the display. If TTL no longer flashes, press the
mode button once.
• While "TTL" is flashing, turn the dial until "ETTL"
appears in the display.
• To save the setting press the dial towards the
arrow; if the dial is not pressed, the setting will
be saved automatically after 5 seconds. After
saving, the "TTL" symbol stops flashing.
mecablitz 76 MZ-5:
• Press the "mode" button until "Mode" appears in
the display with the possible flash modes.
• Next set the flash mode ETTL using the UP
̆
and DOWN
̄ buttons. The selected flash mode
is highlighted by a bar.
☞
13