Maxtor DIAMONDMAX 100451230 User Manual
Maxtor Hardware
Table of contents
Document Outline
- 1.0 Introduction 1
- 2.0 Drive specifications 3
- 2.1 Specification summary tables 3
- 2.2 Formatted capacity 14
- 2.3 Default logical geometry 14
- 2.4 Recording and interface technology 15
- 2.5 Physical characteristics 15
- 2.6 Seek time 16
- 2.7 Start/stop times 16
- 2.8 Power specifications 16
- 2.9 Environmental specifications 20
- 2.10 Acoustics 21
- 2.11 Electromagnetic immunity 22
- 2.12 Reliability 23
- 2.13 Agency certification 23
- 2.14 Environmental protection 25
- 2.15 Corrosive environment 25
- 3.0 Configuring and mounting the drive 27
- 4.0 Serial ATA (SATA) interface 31
- 5.0 Maxtor support services 41
- Figure 1. Typical 5V startup and operation current profile 17
- Figure 2. Typical 12V startup and operation current profile 18
- Figure 3. Serial ATA connectors 28
- Figure 4. Attaching SATA cabling 28
- Figure 5. Drive dimensions for 200 -320 GB models 29
- Figure 6. Drive dimensions for 40-160 GB models 30
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Default logical geometry
- 2.4 Recording and interface technology
- 2.5 Physical characteristics
- 2.6 Seek time
- 2.7 Start/stop times
- 2.8 Power specifications
- 2.9 Environmental specifications
- 2.10 Acoustics
- 2.11 Electromagnetic immunity
- 2.12 Reliability
- 2.13 Agency certification
- 2.14 Environmental protection
- 2.15 Corrosive environment
- 3.0 Configuring and mounting the drive
- 4.0 Serial ATA (SATA) interface
- 5.0 Maxtor support services