Mercedes-Benz 2006 C-Class - Manual (Page 421)

420
Practical hints
Towing the vehicle
Installing towing eye bolt
1 Cover on right side of front bumper
2 Cover on right side of rear bumper
Removing cover
̈ Press mark on cover 1 or 2 in
direction of arrows.
̈ Lift cover off to reveal the threaded
hole for towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the compartment under-
neath the trunk floor).
̈ Screw towing eye bolt in to its stop and
tighten with lug wrench.
Reinstalling cover
̈ Fit cover 1 or 2 and snap into place.