Design specifications, Operational, Mechanical – Metrologic Instruments MS7120 User Manual
Page 33
29
D
ESIGN
S
PECIFICATIONS
MS7120 S
PECIFICATIONS
O
PERATIONAL
Light Source:
VLD 640-660 nm
Depth of Field:
0 mm to 190 mm (0" to 7.5") at default (programmable)
Scan Speed:
1200 scans/second
Scan Pattern:
5 fields of 4 parallel lines (omnidirectional)
Scan Lines:
20
Min Bar Width:
0.13 mm (5.2 mil)
Decode Capability:
Autodiscriminates all standard bar codes;
for other symbologies call Metrologic
System Interfaces:
PC Keyboard Wedge, RS-232, OCIA, Light Pen Emulation,
IBM 46xx, Stand Alone Keyboard, Laser Emulation, USB
(with an MX009 USB converter cable),
Print Contrast:
35% minimum reflectance difference
Number of
Characters Read:
up to 80 data characters (Maximum number will vary based
on symbology and density)
Roll, Pitch, Yaw:
360°, 60°, 60°
Beeper Operation:
7 tones or no beep
Indicators (LED):
Green* = laser on, ready to scan
* Indicator colors
Red* = good read, decoding
can be reversed
M
ECHANICAL
Height:
150 mm (5.9")
Depth:
105 mm (4.1")
Width-Orb:
80 mm (3.1")
Width-Base:
102 mm (4.0")
Weight:
380 grams (13.4 oz.)
Termination:
10-pin modular RJ45
Cable:
Standard 2.1 m (7') straight;
Optional 2.7 m (9') coiled cable
Tilt - Orb:
30° vertical
Continued next page