Madrigal Imaging BPA 3 - Manual (Page 21)

21
Rack Mounting
If you need or prefer to rack mount your amplifier, contact your Proceed dealer
about the optional rack mount kit. This purpose-designed assembly provides the
needed ventilation for the heatsink “chimneys” of the amplifier as well as the sup-
port required for this heavy component.
To use the rack mount kit, simply bolt the shelf securely to the rack, slide the am-
plifier into place, and then mount the provided trim ring around the faceplate of
the amplifier (which will protrude from the rack by approximately one inch or
2.5 cm). The drawing below will help you visualize the assembly (the Proceed
Five Channel Amplifier is illustrated below, but the assembly is the same for the
BPA amplifiers).
The mounted amplifier and rack mount kit occupies 5 standard rack units of
height.