M&S Systems MNCXS - Manual (Page 13)

M&S Systems Page 13 Page 4 MNCX/MNCXS Owners Manual
After carefully unpacking your speakers, the carton and the
packaging material should be saved for possible use later. If
any speaker appears to be damaged, do not attempt to repair or
connect the unit to the amplifier. Repack the speaker and notify
your distributor or M&S Systems for replacement or repair.
You can contact the M&S Customer Service team at 1-800-421-
1587.
Unpacking Your Speakers
MNCXSUB Mini-Cube Speakers
with Subwoofer Package
Contains one pair of speakers,
available in white (MNCX) or black
(MNCXB) and a subwoofer (available
in black only).
Subwoofer Specifications
Frequency Response 30Hz/140Hz
Power Rating 100 Watts RMS
Crossover 40Hz/140Hz
(adjustable)
Height 15 ¾”
Width 14”
Depth 16”
Weight 33.5
lbs
The MNCXS system will require setting up the front, center, and
rear speakers as recommended in your amplifier/receiver
instruction manual. The subwoofer provided with this system
allows setting of the phase, volume, crossover frequency, and
auto power control.
The phase switch is set for the best bass sound. Switch
between the 0 - 180 position until the bass is loudest. In
some applications, there may be no noticeable difference
and in this case leave the switch in the 0 position.
The frequency adjustment can be set between 40Hz and
140Hz. It is recommended that the control be set between
120Hz and 140Hz with the MNCX mini-cube speakers.
The volume control should be set to the desired bass level
for the system.
Setting Up Your System