Mazda 2009 Tribute HEV - Manual (Page 65)

Compass zone adjustment
1. Determine which magnetic zone
you are in for your geographic
location by referring to the zone
map.
2. Turn ignition to the on position.
3. Start the engine.
4. Press the SETUP control to
select the Update Zone function
and display the current ZONE
XX in the center stack display.
5. Continue to press the RESET
control until the correct zone
appears in the center stack
display.
6. The direction will display after
the RESET control is released.
The zone is now updated.
Compass calibration adjustment
Perform compass calibration in an open area free from steel structures
and high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.
1. Start the vehicle.
1 2 3
4
5
6 7 8 9 1011
12
13
14
15
2009 Tribute Hybrid (thv)
Owners Guide, 1st Printing
USA (fus)
Driver Controls
65