Operating your snow thrower, Know your snow thrower, Warning – MTD 769-01275C User Manual

Page 8

Operating

Your Snow

Thrower

Now that you have set up your snow thrower for
operation, get acquainted with its controls and fea-
tures. These are described below and illustrated in
Figure 1. This knowledge will allow you to use your
new equipment to its fullest potential.

NOTE: For detailed starting instructions and more
information on all engine controls, refer to the separate
engine manual packed with your unit

Shift Lever

The shift lever is located in the right side of the handle
panel and is used to determine gorund speed and
direction of travel.

Forward
There are six forward (F) speeds. Position one (1) is the
slowest and position six (6) is the fastest.

Reverse
There are two reverse (R) speeds. One (1) is the slower
and two (2) is the faster.

Know Your Snow Thrower

Choke Control

The choke control is found on the rear of the engine and
is activated by rotating the knob clockwise. Activating the
choke control closes the choke plate on the carburetor
and aids in starting the engine.

Throttle Control

The throttle control is located on the
engine. It regulates the speed of the
engine and will shut off the engine when
pushed down completely.

Primer

Depressing the primer forces fuel directly
into the engine’s carburetor to aid in
cold-weather starting.

Oil Fill

Engine oil level can be checked and oil
added through the oil fill.

WARNING

Read, understand,
and follow all instruc-
tions and warnings
on the machine and
in this manual before
operating.

Use extreme care
when handling
gasoline. Gasoline is
extremely flammable
and the vapors are
explosive. Never fuel
the machine indoors
or while the engine
is hot or running.
Extinguish cigarettes,
cigars, pipes and
other sources of
ignition.

Figure 1

��

��

NOTE: Snow throwers vary
by model with regard to
features and components.
Your snow thrower may
NOT resemble, in detail,
snow throwers illustrated
in figures throughout this
manual.