Moxa Technologies NPort 5400 Series - Manual (Page 31)

NPort 5400 Series User’s Manual Web Console Configuration
5-5
Click on the Modify button to open the Modify time settings window to input the correct local
time.
Time server
Setting Factory Default Necessity
IP or Domain address
(E.g., 192.168.1.1 or time.stdtime.gov.tw
or time.nist.gov) None Optional
The NPort 5410/5430/5430I/5450/5450I uses SNTP (RFC-1769) for auto time calibration.
Input the correct “Time Server” IP address or domain address. Once the NPort is configured with
the correct Time Server address, the NPort will request time information from the “Time Server”
every 10 minutes.
Web/Telnet Console
The “Disable” option for “Web Console” and “Telnet Console” is included for security reasons. In
some cases, you may want to disable one or both of these console utilities as an extra precaution to
prevent unauthorized users from accessing your NPort 5400. The factory default for both Web
console and Telnet console is Enable.
Web console
Setting Factory Default Necessity
Enable or Disable Enable Required
Telnet console
Setting Factory Default Necessity
Enable or Disable Enable Required
ATTENTION
If you disable both the “Web console” and “Telnet console,” you can still use NPort
Administrator to configure NPort 5400 device servers either locally or remotely over the
network. Refer to Chapter 6 for more details.
LCM password protect
Setting Factory Default Necessity
No or Yes No Required
Select Yes to use the web console password to enter the LCM utility. If the console password is
blank, the LCM password will also be blank. To enter the password using the LCM buttons, use
the scroll buttons to locate a particular character, press SEL, enter the next character in the