Microtek MS4 User Manual
Page 18
Adjusting the Projector Level
Take note of the following when setting up the proj ector:
•
The projector table or stand should be level and sturdy.
•
Position the projector so that it is perpendicular to the screen.
•
Be sure cables are not in the way or can cause the projector to be knocked over.
1.
To raise the level of the projector, lift the projector [A] and press the height-adjuster
button [B].
The height-adjuster drops down [C].
2.
To make minor adjustments, rotate the side foot [D].
3.
To lower the level of the projector, press the height-adjuster button and push down
on the top of the projector.