Memorex DR1000-C - Manual (Page 6)

5
INSTALLATION (CONTINUED)
TO USE THE NECK STRAP
Follow the instructions below to use the hand strap:
1. Insert the neck strap through the hole and shown in figures 1 and 2 for
each strap.
2. Loop the strap through the buckle as shown in figures 3 and 4.
3. Put around neck and insert A into B until as snap is heard, as shown in
figure 5. To remove neck strap, simply pull the A from B.
Figure 1 Figure 2
Figure 3 Figure 4
A B
Figure 5
DR1000.O/M.QXD 1/21/03 7:26 AM Page 5